
Roofing
Extension Roofs
Where a new roof meets an old wall is where most extensions leak. It's where we take the most care.
- Family Run
- Local to your village
- Free Quotations
About this work
An extension roof has to do two things: keep the new room dry, and look as though it belongs to the house. The junction between new roof and existing wall is the critical detail, it needs proper lead abutment flashings, correctly formed and dressed, not sealant.
We build extension roofs for homeowners directly and alongside local builders, in whatever form suits the project: pitched and tiled, flat GRP or EPDM, or a combination.
Our approach
How we go about it.
01
Plan the junction
Before anything else we work out how the new roof will meet the existing building and how that junction will be flashed.
02
Build the structure
Rafters or joists, wall plates and ties, to the engineer's or building control requirements.
03
Cover and flash
Tiles or membrane laid, then lead flashings cut into the existing wall and dressed properly.
04
Complete the finish
Fascias, soffits, guttering and rooflights fitted so the roof is finished in one visit.
Free, no-obligation quotation
Not sure how serious it is?
Send a photo or give us a ring. We'll tell you straight, whether it needs work now, watching, or nothing at all.
Real work
Extension Roofs we've completed.
From the archive
This work has been part of ours for decades.
The original photograph and project sheet for this job survive in the company archive. It's shown as printed, not retouched.
See these projects in the archiveMaterials & techniques
What we use, and why.
- Matching clay or concrete tiles
- Natural slate
- GRP and EPDM for flat roofs
- Lead abutment flashings and soakers
- Rooflights and lanterns
- Insulation to current regulations
Specific systems and manufacturers listed once confirmed by the company.
Why experience matters
Old walls are rarely straight or plumb. Knowing how to flash a new roof into a 300-year-old brick wall so it stays dry is something we've done many times around here.
Extension roofs across Tenterden, Biddenden, Rolvenden, Cranbrook, Benenden and the wider Weald.
From the trade
Questions we're often asked
Can you fit Velux-style rooflights?
Yes. We install rooflights into new and existing pitched roofs, and flat-roof rooflights and lanterns.
Do you build the whole extension?
Our focus is the roof. We're happy to work with your builder, and for smaller projects we can sometimes carry out the brickwork too, ask us.
Related
You may also need.

Free, no-obligation quotation
Need something looked at?
Whether it's a leaking roof, an ageing flat roof, a damaged chimney, failing leadwork or a brick wall that needs rebuilding, speak directly to an experienced local contractor.
Just straightforward advice from people who know the trade.






